5-150W High Wattage Box Mod100-300℃ / 200-600℉ Temperature ControlSupport Both Ni-200 Coil and Ti Coil
Specification: :96mm x 44mm x 23.5mmOutput Mod: TC-Ti/ TC-Ni/ VW Mod1) 5 Clicks within 2seconds turn on2) Press the button in 5seconds to shut off the device. Auto shut off for no operating in 3minutes 3) Click 3 times in 2 seconds to swith V/M to T/C model，the machine will hold for 2seconds to switch4) Auto switch to VW mod for kanthanl coil5) Variable Wattage Operating Range:5W–150W6) V/W Atomizer Resistance Range(Kanthal): 0.2Ω–5Ω 7)T/C Atomizer Resistance Range(Ni200 or Ti):0.1Ω–5Ω8)Battery Capacity Required: 0.5V – 9V9)Temperature Control Ranger: 200°F-600°F
l Reverse Battery Protection: Protects the device and battery against reversed battery.
l Short Circuit Protection: Protects the device against shorted atomizers or wiring.
l Resistance Protection: Protects the device when the resistance is out of range.
l Low Voltage Protection: Protects the device when the battery capacity is too low.
l Temperature Protection: Protects the device if the internal board temperature becomes excessive.
l Check Atomizer: No Atomizer / Atomizer is not connected / Atomizer is short circuited / Resistance of Atomizer is out of range.
l Atomizer Short: Atomizer is short circuited / Wiring is short circuited
l Atomizer Too High: The resistance of the atomizer coil is too high for the current wattage setting.
l Atomizer Too Low: The resistance of the atomizer coil is too low for the current wattage setting.
l Over Current: The output current is over 45A, please check the atomizer or other wiring to see if short circuited.
l Over Voltage: The output voltage is too high, please check the atomizer resistance and wattage settings.
l Low Voltage: The output voltage is lower than 6.4V, please charge your battery.
l Temperature Protect: The heating coil reached the maximum allowed temperature during the puff.
l Weak Battery: The battery needs to be charged, or a higher rate battery needs to be used.
l Device Too Hot: The temperature of the board is too high, please stop vaping and let it cool down.